产品详情
半自动吹瓶机一拖二
产品详情

半自动吹瓶机适合吹制各种形状的PET瓶,容积从20毫升到2000毫升,此吹瓶机广泛应用与吹制矿泉水瓶、碳酸饮料瓶、可乐瓶等。

1、采用新型的双曲臂四拉杠合模结构,十字架平衡固定滑动。

2、封口、拉伸采用双杠联体设计,合二为一,有利于产品成型。

3、先进的气路设计,单路、双路进气均可;低压力机械合模、封口、拉          

     伸;高压力吹瓶成型。

4、微电脑自动控制器, 操作方便。

5、瓶坯用红外线加热,可控恒压控制,变频调速,从而达到最佳吹制精

     度。

This machine is suit for the all the kinds PET bottles, the volume form 20ml to 2000ml. Also be applied to blow the mineral water,carbonated drink bottle and coca cola bottle:

1. adopting the new structure of double- bend rod and four pulling rod to close,the

   cross could move in balance and fixed

2. Sealing, stretching adopt double rods design, join two part in one

   body,conducive the product forming

3. Advance air path design,the single and double paths both could enter theair,low

   Pressure to close the mould ,sealing and stretching ,the high pressure to form

4. Use the PLC to control, the mini computer is easy for operating  

5. Infrared heating, could be controlled by the permanent pressure, so as to get

the Best precision


BM

BLOW MOLDING MACHINE